test

Accessories & Fastenings

  • PC® 150 glass-reinforcing mesh

    PC® 150 is a wide-mesh, alkaline-resistant glass mesh for the reinforcement of coatings on FOAMGLAS® insulation. The large mesh width (approx. 3.5 x 3.5 mm) allows the easy penetration of heavy coatings or mineral plaster with a good bonding on the insulation and reinforcement. The thickness of the reinforcement ensures that the necessary quantity of coating is applied and the desired strength is provided.

    Product data sheet PDS_FG_PC150-UK-AE-INT_1503.pdf
    Safety data sheet SDS_PC_150_1212-UK-AE-INT.pdf
  • PC® F anchor mechanical fastening

    PC® F anchors made from stainless steel (1.4301) are designed to eliminate thermal bridging when fastening FOAMGLAS® slab or boards to walls, ceilings and roofs.

     

    The mechanical fastening is carried out with a screw-nail anchor which remains covered in the groove area of the insulation plates. This prevents the vapour-sealed FOAMGLAS® layer from being penetrated. The system remains free from thermal bridging.

     

    Product data sheet PDS_FG_PC_F_anchor-UK-AE-INT_1503.pdf
  • PC® SP 150/150 serrated fixing plates

    PC® SP 150/150 serrated fastening plates are used to eliminate thermal bridging for non-self-bearing metal cover and standing seam applications. They are manufactured from hot-dip galvanized steel 1.5 mm thick with 150mm x 150mm (5.9" x 5.9") dimensions. The edges incorporate 30mm deep serrated teeth.

    Product data sheet PDS_FG_PC_SP_150_150-UK-AE-INT_1503.pdf
  • PC® SP 150/150 P serrated fixing plates, perforated

    PC® SP 150/150 P serrated fixing plates are used to minimise thermal bridging and provide a fastening system for curtain-walled, rear-ventilated façade systems. They are made from hot-dip galvanised steel Z275. The PC® SP 150/150 serrated fixing plate has the following dimensions: 150 x 150 mm (perforated with optional 10.2, 12 or 14 mm diameter hole). 1.5mm thick. The edges incorporate 30mm deep serrated teeth.

    Product data sheet PDS_FG_PC_SP_150_150_P-UK-AE-INT_1503.pdf
  • PC® SP 200/200 serrated fixing plates

    PC® SP 200/200 serrated fixing plates are used as heat-bridging-free fastening system for self-bearing metal cover - industrially pre-fabricated profile sheets. They are made from steel Z275 (EN 10025-2), galvanised. The PC® SP 200/200 serrated fixing plate has the following dimensions: 200 x 200 mm, 1.5 mm thick. The edges in a total width of 20 or 30 mm are designed as jags.

    Product data sheet PDS_FG_PC_SP_200_200-UK-AE-INT_1503.pdf
  • Mixing bar

    Mixing bar to be used with a power drill (electric mixer), at least 800 rpm.

     

    For stirring or mixing of 1- and 2-component products, adhesives and coatings.

     

  • Insulation fixing A-ISOL

    Polyethylene insulation fixing with coarse threads, flat head, a setting and screw receptacle. A-ISOL, with receptacle for screw 4.5 - 5.0 mm Ø.

    For fastening additional layers of FOAMGLAS® on top of the base layer.

    To be used according to the instructions from FOAMGLAS® technical department. The A-ISOL fixing can be screwed with a cordless screw driver / Philipps-tip screwdriver.

 
 
 

Events